Item group

2/2-way solenoid valves from brass

Materials:

Body: brass, internal parts: brass / stainless steel, seal: NBR (types G 1/8" & G 1/4": FKM)

Temperature range:

-10°C to max. +85°C (types G 1/8" and G 1/4": -10°C to max. +130°C), environment: max. +50 °C

Media:

Compressed air, neutral gases, water, neutral low-viscosity media, heating oil, other media on request

Installation position:

With upright magnets

Control voltages:

Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:

± 10 %

Protection class:

IP 65 (plug size 3)

Optional:

FKM seal (-10°C to max. +130°C) -V, EPDM seal for air and warm water (-10°C to max. +120°C) -EP

Information:

These valves are always supplied with a solenoid coil and a connector plug.

Warning:

For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
*Water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge

Documents:

More information Less information
2/2-way solenoid valves from brass:
20 of 182 articles
Immediately available
Immediately available
Immediately available
Immediately available
deliverable again in ⌀ 3 weeks
Immediately available
Not in stock
Immediately available
Not in stock
Immediately available
Not in stock
Immediately available
Not in stock
Immediately available
Immediately available
Immediately available
Immediately available
Immediately available
Immediately available
Immediately available
All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.